The Domin S4 Pro Direct Drive Servo Valve (DDV) represents a revolution in servo valve performance. Up to now, the customer has been left with an uncomfortable choice between the large footprint and weight of a DDV and the pressure and reliability limitations of EHSVs. The compromise is particularly acute with low flow applications.
The S4 Pro is based around the miniature 12.2 mm port circle and weighs less than 300 g with spool feedback for a rated 18 lpm. It delivers all the performance you would expect from a high-performance EHSV but is able to deliver it without the parasitic flow and pressure demands of a two-stage servo valve.
Please browse our range below, if you have any specific adjustments or customisations you want, then please contact us direct by email or through the chat.
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: No
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: No
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No
Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .
Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Nitrile , Weight:290 .
Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .
Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Nitrile , Weight:290 .
Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .
Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Nitrile , Weight:290 .
Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .
Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Nitrile , Weight:290 .
Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .
If you use, or are considering a valve from another provider, we are confident that we have an improved alternative. Choose an option from the drop down, or if the product is not listed, contact us.
40% Fewer Parts25% Higher Flow400% Smaller200%+ FasterHigher quality hydraulic valves and systems available at a lower price than more established units.
Find Out MoreWhich is the same as:
My Account
Cart