Collections
Filter

Weight

Rated Flow

Power Off Position

Connector

Input Signal

Lap Condition

Seal Material

Fluid Type

Enable Mode

S4 Pro Direct Drive Servo Valve

The Domin S4 Pro Direct Drive Servo Valve (DDV) represents a revolution in servo valve performance. Up to now, the customer has been left with an uncomfortable choice between the large footprint and weight of a DDV and the pressure and reliability limitations of EHSVs. The compromise is particularly acute with low flow applications.

The S4 Pro is based around the miniature 12.2 mm port circle and weighs less than 300 g with spool feedback for a rated 18 lpm. It delivers all the performance you would expect from a high-performance EHSV but is able to deliver it without the parasitic flow and pressure demands of a two-stage servo valve.

Please browse our range below, if you have any specific adjustments or customisations you want, then please contact us direct by email or through the chat.

Showing products 1 - 9 of 95
View

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 6 pin + PE Enable Yes Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 5 V, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 6 pin + PE Enable No Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 5 V, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 4 pin Enable Yes Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 5 V, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 4 pin Enable No Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 5 V, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 6 pin + PE Enable Yes Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 20 mA, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 6 pin + PE Enable No Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 20 mA, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 4 pin Enable Yes Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 20 mA, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 4 pin Enable No Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 20 mA, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 10 V Centre 6 pin + PE Enable Yes Standard Oil Viton

Weight: 290 g, Rated Flow: 1-18 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: ± 10 V, Lap Condition: Axis Cut %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes

£2,375 ex VAT
Delivery: 10-14 weeks Configure and buy

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 6 pin + PE Enable Yes Standard Oil Viton

S4 Pro-1-A-D-C-E-Y-R-V

Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 5 V , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 6 pin + PE Enable No Standard Oil Viton

S4 Pro-1-A-D-C-E-N-R-V

Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 5 V , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 4 pin Enable Yes Standard Oil Viton

S4 Pro-1-A-D-C-E4-Y-R-V

Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 5 V , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 5 V Centre 4 pin Enable No Standard Oil Viton

S4 Pro-1-A-D-C-E4-N-R-V

Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 5 V , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 6 pin + PE Enable Yes Standard Oil Viton

S4 Pro-1-A-B-C-E-Y-R-V

Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 20 mA , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 6 pin + PE Enable No Standard Oil Viton

S4 Pro-1-A-B-C-E-N-R-V

Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 20 mA , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 4 pin Enable Yes Standard Oil Viton

S4 Pro-1-A-B-C-E4-Y-R-V

Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 20 mA , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 20 mA Centre 4 pin Enable No Standard Oil Viton

S4 Pro-1-A-B-C-E4-N-R-V

Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 20 mA , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

S4 ProFlow 1-18 Axis Cut ± 10 V Centre 6 pin + PE Enable Yes Standard Oil Viton

S4 Pro-1-A-A-C-E-Y-R-V

Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:Axis Cut , Power Off Position:Centre , Rated Flow:1-18 , Seal Material:Viton , Weight:290 .

£2,375 ex VAT
Delivery: 2-3 weeks

The positive impact of Domin Next Generation Products

  • 40% Fewer Parts
  • 25% Higher Flow
  • 400% Smaller
  • 200%+ Faster

Higher quality hydraulic valves and systems available at a lower price than more established units.

Find Out More

Our Current Annual CO2 Savings

472 Metric Tonnes

Which is the same as:

19.4m
Smartphones fully charged
396.4k
Miles driven in average car
18.0k
Litres of petrol saved
18.2k
Trees planted
324.0
Passengers flown from New York to London
20.0
Homes' annual electricity consumption
Domin - Making a positive impact on global scale Find Out More