The Domin S6 Pro Direct Drive Servo Valve (DDV) has been designed to achieve the best characteristics from two competing valve technologies: fluid amplified EHSVs and DDVs. The S6 Pro has the size, weight and dynamic capabilities of the most compact EHSV, and the low quiescent leakage and reliability of the best DDV.
The aim has been to achieve efficiency in manufacture and operation with an emphasis on high performance with minimal energy consumption.
Please browse our range below, if you have any specific adjustments or customisations you want, then please contact us direct by email or through the chat.
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: No
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: No
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: No
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 6 pin + PE, Input Signal: 4 to 20 mA, Lap Condition: 10% Overlap %, Seal Material: Viton, Fluid Type: Standard Oil, Enable Mode: Yes
Weight: 550 g, Rated Flow: 20-60 lpm, Power Off Position: Centre, Connector: 4 pin, Input Signal: ± 10 V, Lap Condition: 10% Overlap %, Seal Material: Nitrile, Fluid Type: Standard Oil, Enable Mode: No
Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Nitrile , Weight:550 .
Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Viton , Weight:550 .
Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Nitrile , Weight:550 .
Connector:4 pin , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Viton , Weight:550 .
Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Nitrile , Weight:550 .
Connector:6 pin + PE , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Viton , Weight:550 .
Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Nitrile , Weight:550 .
Connector:6 pin + PE , Enable Mode:Yes , Fluid Type:Standard Oil , Input Signal:4 to 20 mA , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Viton , Weight:550 .
Connector:4 pin , Enable Mode:No , Fluid Type:Standard Oil , Input Signal:± 10 V , Lap Condition:10% Overlap , Power Off Position:Centre , Rated Flow:20-60 , Seal Material:Nitrile , Weight:550 .
If you use, or are considering a valve from another provider, we are confident that we have an improved alternative. Choose an option from the drop down, or if the product is not listed, contact us.
40% Fewer Parts25% Higher Flow400% Smaller200%+ FasterHigher quality hydraulic valves and systems available at a lower price than more established units.
Find Out MoreWhich is the same as:
My Account
Cart